810 DenBeste Ct., Ste. 107Windsor, CA 95492

Mix Tank

20,500 Gallon Capacity
  • All 1/4” Steel Plate Construction
  • Smooth Interior Walls
  • Integrated Stairways with Larger Walkways and Platforms
  • Safety Harness Clips for Worker Safety
  • Lifting Eyes for Difficult Tank Placement
  • ABS Braking Systems
  • Multiple Options Available
Mix tank with 20,500 gallon capacity.

Specifications

  • Length 45' 4" (tank only) 53' 3" (including platform)
  • Height Ground to Roof Deck - 9' (108 inches); Grade to Top of Upright Guard Rails - 13' (156 inches)
  • Width 8' (96 inches)
  • Capacity 20,500 Gallons
  • Operating Specs Max Pressure Rating 1 PSI/Max Vacuum Rating 0.25 PSI
  • Floor 1/4" A36 Carbon Steel
  • Top Deck 1/4" A36 Carbon Steel
  • Sides/Ends 1/4" A36 Carbon Steel (Smooth Walls)
  • Relief Valve LL20 Blaylock aluminum spring loaded thief hatch with 16oz/in Pressure Setting; 0.4oz/in Vacuum Setting; Buna-N Pressure Gasket
  • Main Rails Structural Channel - 10" x 2 1/2" x 15.30 pounds per foot
  • Manways (4) 20" Manways, located (1) front, (2) roof, (1) rear. (1) 25" Manway on curbside of tank. Equipped with Buna-N Gaskets
  • Front Valves (2) 6" Butterfly/Wafer Valves
    (2) 4" Butterfly/Wafer Valves
  • Rear Valves (1) 6" Butterfly/Wafer Valves
    (1) 4" Butterfly/Wafer Valves
  • Roof Deck Vapor Recovery - (1) 2" NPT Male Thread; (1) 4" Blind Flange
  • Level Indicator Ohmart Vega 60 Series Pulse Radar Gauge
  • Axle 5" RD; 77.5" Track
  • Suspension Spring - 22.5K Capacity
  • Heating Coils (2) 3" 150# raised face flange with blind flange at front of tank; 3" SCH 80 pipe
  • Guardrails Top deck fold down 1 1/4" x 1 1/4" square tubing running the entire length of the tank
  • Roof Access Front ladder within the working platform
  • Front Working 6' 2" L x 8' 6" W platform with guardrails
  • Electric Motors 3 Phase; 10HP; 1,760RPM; 208-230/460 Volts
  • Gear Boxes 22,100lb of Torque; 24.92 Ratio; Service factor 1.0
  • Mixer Shaft (4) 80" L x 2 3/8" Diameter
  • Power Supply 480V 3 Phase regulated voltage and current supply capable of supplying 60A/min (per customer)
  • Motor Control NEC and OSHA compliant control panel on front wall of tank (explosion resistant)
Get A Quote or Questions Answered Contact Us